Home Featured Here are 7 of the most common paving mistakes to avoid! – Expert in home decor

Here are 7 of the most common paving mistakes to avoid! – Expert in home decor



Asphalt is an extremely popular paving material. It’s strong, durable and long-lasting, but can go wrong if not routed properly. Here are 7 of the most common paving mistakes to avoid when choosing asphalt for your next paving project.

What is asphalt and what is it used for?

Before we delve into the mistakes that can be made with Tarmac, we thought we’d first explain what it is and what it’s used for. Asphalt is essentially a combination of aggregate and bitumen binder mixed together at high temperature and then applied to the ground to create a durable and smooth surface. Asphalt can be used for many applications, some of the most common are driveways, paths, roads, parking lots, sidewalks and more.

Error in asphalting

Bad planning

Laying asphalt is usually a major construction job that requires a certain level of skill and the right technique and equipment must be used to achieve a flawless finish. Getting this wrong can lead to safety concerns as well as a shabby looking finish. You must have a comprehensive plan and consider many elements such as dimensions, thickness, drainage and more. Asphalt can be extremely difficult to remove once laid. For this reason, it is important to hire a professional to lay your asphalt. It takes the guesswork out of it and gives you peace of mind knowing it’s being done right.

Inferior compression

Asphalt compaction requires a lot of thought. If you don’t compact your asphalt sufficiently, the surface will likely have cracks or bumps throughout. Unless you have experience laying asphalt, it can be difficult to master all the steps required to achieve a quality and durable finish.

Choosing the wrong contractor

Choosing the wrong contractor is just as bad as doing it yourself and getting it wrong. Rather than simply going for the cheapest contractor you can find, it pays to do your research and choose a contractor who is highly skilled and experienced in all facets of asphalt applications. Make sure the contractor you choose is insured and licensed. Don’t be afraid to ask the contractor for references and examples of their previous work. You can check their reviews online to get an idea of ​​the level of service they provide and the quality of their work. If their reviews are bad, avoid them. You don’t want to be another dissatisfied customer.

Use of poor quality asphalt

There are many different types of asphalt and not all are of the same quality. Using an inferior asphalt will certainly result in an inferior finish. It really pays to spend a little more on a higher quality asphalt to get a superior finish that lasts. Remember that your asphalt will be exposed to all sorts of harsh conditions such as UV rays, rain, heavy loads and more. So the more resilient it is, the better. It may cost a bit more now, but can save you from having to repeat it sooner than you want, which will cost you more.

Sealer was not applied correctly

Asphalt must be sealed after installation to prevent premature degradation. Sealing must be done relatively soon after the asphalt is laid. If you wait too long, it may be affected by rain or external pollution. The weather should also be considered when laying new asphalt. Make sure your asphalt is laid when there is a lot of sunshine and no rain is forecast. If you have any questions, get in touch with your local contact Tarmac driveway from Brisbane Experts!

Drainage was not considered

Drainage is an important consideration when installing a new hardscaping project. If you don’t account for drainage, water is likely to collect on your pavement and over time it can seep into the pavement and subgrade material. From here the subsoil shifts and can cause potholes. Another serious problem is when water has nowhere to drain and the asphalt hits the house, the water can run into your house and cause water damage. Always consider how and where water can drain when laying new asphalt. You don’t want to unknowingly cause a flood on your property.

Not properly preparing the soil beforehand

Before the asphalt can be laid, the subsoil must be professionally prepared. If you skip the crucial step, you will most likely end up with a worse outcome in both the short and long term. The ground must be properly prepared to provide a strong foundation for the asphalt to be laid on top. For example, rocks and any greenery in the path must be cleared, etc.

Tarmac can be messy, so it’s wise to hire a pro!

If you already have asphalt laying experience, laying your own asphalt can be a task that is within your skill set, if not it can be extremely difficult to get it right and it just isn’t worth the effort or that Worth the risk of making your business or property look worse than it was. It’s wise to hire a professional asphalt contractor to take care of it for you when you want a flawless finish that will stand the test of time.

For all your asphalt and bitumen needs on the Gold Coast and surrounding areas turn to the professional team here at Bitumen Constructions.



Please enter your comment!
Please enter your name here